Routine maintenance includes maintaining Foshan Channel steel punching machine The surface is clean and the body is kept free of sundries. If the machine is out of service for a long time, the surface should be wiped clean and coated with anti rust oil. The sliding block shall also be filled with lubricating oil frequently to keep the surface of the column clean. The working fluid should be replaced regularly. It is recommended to replace it once a year and the replacement time should not exceed three months. Foshan Channel Steel Punching machine When starting the machine, always observe whether there is displacement or abnormal noise. If any problem is found, it should be solved in time before work. At the same time, check whether the pneumatic part of the channel steel punching machine can be clamped and separated flexibly, and ensure that the pneumatic effect can be sucked and pulled freely. Ensure that the air nozzle will not leak, and confirm that the transmission, connection, lubrication and other parts of the channel steel punching machine, as well as the protective safety device are normal. During the operation of the channel steel punching machine, the operator shall strictly follow the correct steps. At the end of the channel steel punching machine, the power supply shall be cut off immediately, and the machine tool shall be wiped and the working environment shall be cleaned in time. Persisting in inspection and maintenance is the key to the long-term operation of Foshan channel steel punching machine.