We often consider what numerical control mechanical equipment is the ideal of the mechanical industry. major Rack punching machine High degree of automation control; The NC punching machine with high degree of automation has become a good helper for pipe processing enterprises. Employees only need to master some key data, Hebei Rack punching machine manufactor And these devices are usually simple to operate, fast and efficient. CNC punching machine has high cost performance ratio; At present, there are few enterprises that can really reach this standard, because some enterprises in the NC punching machine industry only care about the price, and do not care about product quality and after-sales.

The reason why the NC automatic punching machine for profiles is favored by a large number of manufacturers is due to its excellent performance characteristics. multi-function. The NC profile automatic punching machine can form multiple holes of any shape on pipes of any specification and material at one time, the pipe wall can be of any thickness, and the hole center distance can be adjusted at will. high-precision. Hebei major Rack punching machine The punching machine is controlled by the NC programming program of the machining center, and the processed hole shape is flat and the center distance is accurate. Easy to operate. Rack punching machine The whole machine is controlled by microcomputer, which is easy to operate and learn. Super efficient. The equipment can meet the requirements of a large number of openings in a unit time, and its efficiency is much higher than that of traditional punches.

The normal CNC punching machine can customize the operation procedure of the product according to the customer's product requirements, Hebei Rack punching machine And the whole process does not require professional computer personnel to program. The CNC punching machine has specially designed a humanized human-computer interactive operation screen. The operator only needs to input the required punching hole diameter, punching hole position, thickness and other variables, and then just wait and observe whether the equipment is in good condition. The CNC punching machine adopts the domestic double vane pump as the main component equipment of its bearings, major Rack punching machine Compared with the traditional pump, this equipment has the characteristics of low noise, high efficiency, large flow and long service life. At the same time, the high-quality CNC punching machine is specially equipped with a high-quality cooling system to ensure the smooth and efficient operation of the equipment.

The customer should implement the configuration of the automatic punching machine, such as working and operating principles, motor power, etc. major Rack punching machine manufactor It also depends on what is easy to ignore at ordinary times: such as the thickness of steel plate, or even the material of die steel. Whether the machine table is reinforced or thickened. Rack punching machine See if the design is humanized. Mechanical things will inevitably break down, but some businesses only consider occupying the market at a low price without considering these details, but these details will directly affect the customer's future production.

During commissioning, it is not necessary to feed materials, but it is necessary to first raise the guide screw on the guide plate, and then gradually adjust the ram of the punch to the bottom dead center by inching. It is necessary to pay special attention to that the guide plate should not press the floating rod too low, otherwise the floating rod will be bent or broken. major Rack punching machine manufactor When starting the punching machine for continuous punching, it is necessary to rotate the speed adjusting screw of the nc servo feeder clockwise. The slider moves slightly slowly, so that it can be seen whether the slider touches the nylon gasket and the length adjusting screw when it moves back and forth. Rack punching machine If the full-automatic punching machine only touches the length adjusting screw but not the nylon gasket when the sliding block moves back and forth, it is because the floating rod is lowered too deep, and the guide screw on the punching machine needs to be gradually raised.